Take a look at the rear axle of your Arctic Cat/Yamaha sled. How many idler wheels are there on the rear axle? Or, do you have a one-piece tri-hub unit with two wheels on the inside and no wheels on the outside? The fact of the matter is your sled will be more durable with four wheels on the rear axle. If you run studs, then this is even more important. If you ride in extreme conditions or cross country style, you want all the wheels in there.
This 4th Wheel Kit will take 50% of the load from the 2 inner rear wheels. If there is a wheel failure with either of the stock rear axle wheels, your sled will no longer be rideable. With this wheel kit you can continue to ride.
This kit provides full support across entire track width to prevent cat-walking (veering left or right under hard acceleration). Also makes it easier to check track alignment by looking at the distance between the edge of track and the outer wheels. Gives your sled a complete look. Can also get kit with all four wheels to eliminate the inner wheel hub altogether. For most Arctic Cat & Yamaha sleds. Two kits to choose from with 7.120” diameter wheels for 129” sleds and 8” wheels for the longer tracks. Contact J&T Products at 810-545-0066 or visit www.jtatv.com